The priority of house owners should be to keep loved ones and valuables secure, but sometimes they pay less attention to
door lock problems until something goes wrong.
If you would like to avoid possible lockout, or lock issues that are costly to repair and should ruin your day, then adhere to the right maintenance of your door locks.
Here are some common door lock problems which will be an inconvenience and eventually cause expensive lock replacement further down the road.
The key’s stock or broken inside the door lock
Your key could also be stuck due to a misaligned door latch or because some components of the lock are not properly lubricated. If the key’s stuck, forcing it to show may lead to breaking the key inside the locks. We understand that you simply are low on time and in a hurry to meet up with an appointment. However, if you notice that the keys are stuck on the lock, don’t force it to open or close; you may end up aggravating the problem.
Call knowledgeable at EZ Locksmith Services to help remove the key and repair the locks.
Slow door lock problems
Stiffened or slow door locks may occur as a result of the accumulation of dirt or grime in your locks. If you notice that the handle of your lock is slow or it’s difficult inserting the key into the lock. you’ll opt for a DIY method by inserting a cotton swab into the lock to remove the dirt.
If the lock isn’t lubricated enough, use a graphite or silicon spray on the lock, and never use oil or grease because they will clog during the cold seasons.
Misaligned latch
In case the door latch does not catch the strike plate, you’ll find it difficult to shut or lock your door properly. This problem can sneak up from time to time, and it is often caused by improperly installed or screwed hinges, damp weather, or heat.
To fix this issue, you would like to see the misalignment and use the right tools to adjust the strike plates and tighten the door hinges. If it’s not repairable otherwise you don’t have the tools or capacity for a DIY method, call experts at EZ Locksmith, who are available 24/7 for locksmith services.
The key turns but doesn’t lock
Small worn or fallen parts could cause the key to showing in the lock without pushing the knobs. This is often a mechanical problem and should be fixed by someone who understands how a door mechanism works. On the opposite hand, if the key refuses to show as you insert it into the locks, then you would like to lubricate the keyhole by spraying graphite.
Faulty door mechanism
Most door problems are mechanical and they become faulty with time and wear. Old locks could also be problematic because of excessive use, and non-maintenance of the locks can make them defective.
Therefore, mechanical problems of locks should be left for professionals to handle because it isn’t even worth trying a DIY option if you don’t know the mechanism of the locks.
At EZ Locksmith, we use non-destructive methods to repair door lock problems, and our local trust locksmith services will make sure that the locks are back into tip-top shape before leaving your premises.