A strike plate plays an essential role in door security by reinforcing the lock. In addition to improving the security of your door, a strike plate ensures that the door is properly anchored to the frame and protects the jamb from door friction. However, you may need locksmith services 24/7 in case, the strike plate can become misaligned with your door lock due to settling, regular use, and the addition of slats. Locksmith services 24/7! as it can happen at any time, any day . A misalignment of the door can cause several problems. For instance, it can prevent the door from closing properly, weaken the door frame and ultimately compromise the effectiveness of the lock.
Let’s look at how you can adjust the door strike.
Tighten the mounting screws
The mounting screws that hold the strike plate in place can loosen over time due to regular use. The solution to a misaligned strike plate can be as simple as tightening the mounting screws with a screwdriver.
Adjusting the striker
You can also adjust the door strike by adjusting the hole so that the bolt fits properly. You may need expert locksmith services 24/7 for that purpose.
Moving the striker
Another way to adjust a striker is to move it so that the adjustment screws do not overlap the old ones. This is recommended when the misalignment is too great to be corrected by tightening the mounting bolts or enlarging the stop hole.
Installation of adjustable stops
An adjustable stop plate has oval screw holes and allows adjustments to be made without drilling new screw holes. Simply remove the screws and slide the other side out. If the stop hole is not wide enough, use a chisel to make it a little wider. However, you must be careful not to overdo it, as this will only weaken the connection between the top plate and the door frame over time.
If the stop plate on your door is not aligned correctly, even after you have made all the necessary adjustments, you may want to consider installing a new stop plate. Be sure to consult a nearby locksmith before deciding to replace your door’s strike plate.
The strike plate is an integral part of your door lock, so you must keep it in good condition to prevent damage to your lock and door frame. If you discover that the strike is out of alignment, you must act immediately to avoid further problems. You should only repair a misaligned door opening if you know what you are doing and have the right tools to do the job safely. If you are not an experienced locksmith, it is advisable to leave this task to an experienced and qualified locksmith. Call EZ Locksmith
for all of your residential and commercial locksmith services 24/7.
Locksmith Services 24/7
If you are looking for a residential or commercial locksmith, you have come to the right place. EZ Locksmith offers a wide range of reliable and affordable locksmith services 24/7 (any time, any day), including door lock installation and replacement, door lock replacement, secure unlocking, key fitting, deadbolt installation, lockout service
, and much more.